Civil Engineering Questions and Answers Part 4
Q1 The split tensile strength of M 15 grade concrete when expressed percentage of its compressive strength is
option
1) 10 to 20 %
2)15 to 20 %
3) 20 to 25 %
4) 25 to 30 %
Show
Q2 The approximate ratio between the strength of cement concrete at 7 days and at 28 days is
option
1)3/4
2)2/3
3)1/2
4)1/3
Show
Q3 Modulus of elasticity of M25 concrete as determined by formula of IS :456 is
option
1) 124500 MPa
2) 90125 MPa
3) 28500 MPa
4) 16667 MPa
Show
Q4 General shrinkage in cement concrete is caused by
option
1)carbonation
2) stressed due to external load
3)drying with starting with a stiff consistency
4) drying with starting with a wetter consistency
Q5 The optimum number of revolution over which concrete is to be mixed in a mixer machine is
option
1)10
2)20
3)50
4)100
Q6 As per IS code of practice ,concrete should be cured at
option
1)5 ℃
2)10 ℃
3) 27 ℃
4) 40 ℃
Q7 The ratio of direct tensile strength to that of modulus of rupture of concrete is
option
1) .25
2).5
3).75
4)1.0
Q8 Which one of the following aggregate gives maximum strength in concrete ?
option
1)Rounded aggregate
2) Elongated aggregate
3) Flakey aggregate
4) Cubical
Q9 Which of the following types concrete is most suitable in extreme cold climates
option
1)Air- entrained concrete
2) Ready mix concrete
3) vacuum concrete
4) coarse concrete
Show
Q10 What is the range of fineness modulus of sand which is least suitable for making a good concrete
option
1) 3.5- 4.5
2) 2.9 - 3.2
3) 2.6 -2.9
4) 2.2 -2.6
answer
1)15 to 20 %
2)2/3
3)28500 MPa
4)drying with starting with a wetter consistency
5)20
6) 27 ℃
7).5
8)Cubical
9)Air- entrained concrete
10) 3.5- 4.5
option
1) 10 to 20 %
2)15 to 20 %
3) 20 to 25 %
4) 25 to 30 %
Show
Hello
Q2 The approximate ratio between the strength of cement concrete at 7 days and at 28 days is
option
1)3/4
2)2/3
3)1/2
4)1/3
Show
Hello
Q3 Modulus of elasticity of M25 concrete as determined by formula of IS :456 is
option
1) 124500 MPa
2) 90125 MPa
3) 28500 MPa
4) 16667 MPa
Show
Hello
Q4 General shrinkage in cement concrete is caused by
option
1)carbonation
2) stressed due to external load
3)drying with starting with a stiff consistency
4) drying with starting with a wetter consistency
Q5 The optimum number of revolution over which concrete is to be mixed in a mixer machine is
option
1)10
2)20
3)50
4)100
Q6 As per IS code of practice ,concrete should be cured at
option
1)5 ℃
2)10 ℃
3) 27 ℃
4) 40 ℃
Q7 The ratio of direct tensile strength to that of modulus of rupture of concrete is
option
1) .25
2).5
3).75
4)1.0
Q8 Which one of the following aggregate gives maximum strength in concrete ?
option
1)Rounded aggregate
2) Elongated aggregate
3) Flakey aggregate
4) Cubical
Q9 Which of the following types concrete is most suitable in extreme cold climates
option
1)Air- entrained concrete
2) Ready mix concrete
3) vacuum concrete
4) coarse concrete
Show
Hello
Q10 What is the range of fineness modulus of sand which is least suitable for making a good concrete
option
1) 3.5- 4.5
2) 2.9 - 3.2
3) 2.6 -2.9
4) 2.2 -2.6
answer
1)15 to 20 %
2)2/3
3)28500 MPa
4)drying with starting with a wetter consistency
5)20
6) 27 ℃
7).5
8)Cubical
9)Air- entrained concrete
10) 3.5- 4.5
Subscribe to:
Post Comments
(
Atom
)
-
When a real fluid flows over a solid body ,the fluid particles at the surface of the body flow with the same velocity as that of the surfa...
-
Content Hydrology Hydrological cycle, Ground water hydrology, Well hydrology and related ,data analysis; Streams and their gauging...
-
Civil engineers are in charge of making and outlining spans, structures, roadways, and different bits of foundation that are vital inside ...
Civil Engineering Interview Questions
Civil Engineering Interview Questions Q1 . What is civil engineering ? Q2 What is work of a civil engineer ? Q3 Define various...

No comments :
Post a Comment